A Geotechnically-Oriented GIS for Seismic Hazard Mapping
A geotechnical GIS has been configured by the California Department of Conservation's Division of Mines and Geology for the purpose of designating seismic hazard zones as mandated by recent...
Characterization of Man-Made Vitreous Fibers by Image Analysis
This paper deals with the characterization of man-made vitreous fibers (MMVF), seen as an application of the techniques of image analysis and mathematical morphology. We present the whole...
Radiographic Visualization in Experimental Soil Mechanics
A summary of the principles of such methods is presented, i.e. stereophotogrammetry, infrared thermography and radiography and their respective ranges of applicability are discussed. Then,...
Portland Cement Concrete Apron Pavement Design Study for King Fahd International Airport in Saudi Arabia
The Federal Aviation Administration (FAA) Advisory Circular 150/5320-6C used for design of portland cement concrete (PCC) pavements for airports does not account for the site-specific...
Fracture Mechanics
This brief report, prepared by ACl 447 Subcommittee 2, reviews recent advances in finite element modeling of fracture and damage in concrete structures. The fundamentals of the fracture...
The Hazard In Using Probabilistic Seismic Hazard Analysis
Probabilistic seismic hazard analysis has been used extensively for major dams; nuclear power plants; liquefied petroleum gas installations; repositories for dangerous wastes; sensitive...
Seismic Remediation for Earth Dams
Over the last 30 years or so, new analysis methods and case histories of dam performance in earthquakes have significantly changed our understanding of the severity of the earthquake hazard...
Service Records of Chicago District Breakwater Stone and How These Relate to Test Results
Breakwater stone production is limited to areas with geologic outcrops capable of producing large rocks. The most reliable breakwater stone is that which exhibits the highest degree of...
Producing Armourstone Within Aggregate Quarries
This paper discusses a series of full-scale trial blasts which was conducted in an aggregate producing quarry with the objective of improving yields of armourstone. The quantitative research...
Some Case Histories of Armor Stone Production
The blasting techniques used to produce armor stone, derrick stone, and underlayer stone [one to twenty tons] for the construction of rubblemound breakwalls and the confined Dike Disposal...
Recent Experience With Armor Stone Cracking in the Buffalo District
Accelerated deterioration of large armor stone on the Cleveland East Breakwater, Cleveland, Ohio has resulted in the need for more intensive monitoring of the entire armor stone production...
The Durability of Rubble Mound Armour in Service ? A Case Study
Over the past decade, the ongoing monitoring of Gold Coast rubble mound structures in service has demonstrated a serious loss of durability over a period of time in the rock units after...
Behavior of Urugua-I Dam
URUGUA-I with its 76 m height is one of the higher lean roller compacted concrete dams. The project includes some outstanding features like the very low cement content and a PVC membrane...
Thermal Analysis for RCC?A Practical Approach
Roller compacted concrete (RCC) structures, by nature of the construction method, tend to be monolithic structures or structures with minimal contraction jointing. Recurring questions...
Study of Three Dimensional Crack Tip Location of Mortar by Acoustic Emission
Plain mortar specimens were tested under three-point bending. Experimental variables include the width of the specimen and the notch-to-depth ratio. The experimental results of 12 specimens...
Analytical Studies on the Seismic Response of Lead Rubber Base Isolated Bridges
Highlights of a study related to the response of base isolated bridges are presented. Four different analytical models are developed and used to evaluate the response of base isolated...
Experimental Determination of the Relation Between the Damaged Zone and the Aggregate Size in Concrete Through Acoustic and Mechanical Techniques
The size of aggregates in concrete has an influence on the behavior of the material. The width of the localized band can be related to this characteristic. Different experimental techniques...
Stress Transfer Within Granular Geomaterials
Local stresses within granular materials are random variables whose variance depends on the size of the elementary surface considered. This paper shows that this 'mechanical scale effect'...
Size, Temperature and Rate Effects on the Fracture Toughness of Saline Ice
This paper presents the results of an extensive experimental study performed with the aim of investigating the effects of temperature, size and loading rate on the fracture toughness of...
Dynamic Analysis of Sliding Seismic Isolators
The friction pendulum system (FPS) sliding seismic isolators are being used for the seismic isolation rehabilitation of the U.S. Court of Appeals Building, San Fransisco. This paper will...
Return to search